Before assembling your sauna, it’s important to prepare your space correctly. Proper setup ensures safe operation, optimal performance, and a smooth installation.
1. Choose the Right Location
Select a location that meets the following requirements:
- Flat, level, and stable surface
- Enough space for assembly and use
- Dry and well-ventilated area (for indoor setups)
Indoor Installations
- Place in a dry, climate-controlled space (home gym, basement, spare room)
- Avoid areas with excess moisture or poor ventilation
Outdoor Installations
- Install on a stable, weather-resistant base (concrete, deck, or pavers)
- Ensure proper drainage
- Add overhead protection (awning or cover) to extend lifespan
2. Electrical Requirements
Confirm your electrical setup before installation:
- Use a dedicated circuit
- Verify voltage and amperage match your sauna’s requirements
- Hire a licensed electrician if installation is required
⚠️ Avoid using extension cords where possible, and do not use shared outlets.
3. Clearance Requirements
Ensure proper spacing around the sauna:
- 2–6 inches of clearance on the sides and back
- Enough space in front to fully open the door
- Adequate room above the unit (for indoor installs)
4. Flooring Requirements
Your sauna can be placed on any flat, level, and stable surface, including:
- Carpet
- Rubber gym mats
- Tile, concrete, vinyl, or wood
If placing on uneven surfaces such as gravel, brick, or flagstone:
- You must level the base using shims before installation
5. Indoor vs. Outdoor Placement
Before installation, confirm whether your sauna is designed for indoor or outdoor use.
-
Indoor models must be installed indoors only
- Do not place indoor units outside or in exposed environments
- Keep in a dry, climate-controlled space
-
Outdoor models are designed for exterior use, but:
- Must be installed on a proper foundation
- Benefit from overhead protection (awning or cover)
If you're unsure which model you have, check the product page, or contact support before installation.
6. Wi-Fi & Connectivity (If Applicable)
For models with app or smart features:
- Ensure a strong Wi-Fi signal at the installation location
- Avoid areas that block signal (e.g., metal enclosures, distant basements)
7. Assembly Preparation
Before starting assembly:
- Clear space to lay out all components
- Have at least 2 people available
- Keep tools and instructions nearby
Final Checklist
Before installation, confirm:
- ✅Flat, level surface
- ✅ Dedicated electrical circuit
- ✅ Proper clearance around the unit
- ✅ Correct indoor/outdoor placement
- ✅ Strong Wi-Fi signal (if applicable)
Frequently Asked Questions
Can I place my sauna on carpet?
Yes. Your sauna can be placed on any flat, stable surface, including carpet or rubber gym mats.
What surfaces are not recommended?
Uneven surfaces like gravel, brick, or flagstone require leveling. Use shims to create a flat foundation before installation.
Do I need a dedicated circuit?
Yes. A dedicated circuit is required for safe operation.
Can I install my sauna outside without a cover?
Yes, for outdoor models. However, adding overhead protection will help extend the life of your sauna.
How much space do I need around the sauna?
Allow 2–6 inches on the sides and back, plus enough room in front to fully open the door.
What if my floor isn’t level?
You must level the base before installation. Use shims as needed.
Will my sauna work in a cold garage or outdoor space?
Yes, but colder environments will increase heat-up time.
Do I need Wi-Fi for my sauna to work?
No. Wi-Fi is only required for app-based features.